social media links

Sunday, September 22, 2013

BBC Vest to ABC Shawl Collar Dress

Voting opened on Friday for the Flip This Pattern September challenge.  There are three of us competing with three very different looks so there's bound to be one that catches your eye.  I'd love it if you took a moment to go vote (note: voting closes Sunday the 22nd at 11pm)


While I await my fate (hehe), I thought I'd post a bit about how I flipped the BBC Vest into the ABC Shawl Collar dress.  The shawl collar is adorable and it couldn't have been done without the perfect roll collar of the original vest from Shwin Designs.  In fact they flipped it themselves and now have the Paperback Writer Cardigan which uses the same collar shape.  I might have to grab that pattern too.


I decided to make another ABC Shawl Collar Dress with the original fabric I had intended to use for the flip.  Since it was a lovely plaid I found at JoAnn fabrics, I thought it would be perfect for the Mad About Plaid themed week at Project Run & Play so I made the original out of the stretch purple fabric and held onto the plaid.  This week I decided Bean needed a long sleeved (not just three quarter sleeved) version of the dress so I reached for the plaid and a coordinating knit and made another dress.  This one was surprisingly quick to make, but I decided to take some pics as I went along to show the steps I took to make the flip.

FYI, there are some affiliate links in this post and they will be marked with an asterisk *. 


As I mentioned in the original post, I used the basic shape of the Anywhere Dress* since that is one we love over here.  It works so well for knits and I knew with a banded bottom edge it could feel like a comfy sweater dress.  Since the front of the dress would be faux wrap, I needed to trace both sides of the pattern to get one full front piece to flip.  Then I overlay the front vest pattern piece to mark where the original shoulder and collar of the BBC Vest would be (green line shown below).


I wanted a slightly fuller collar and it needed to extend to the edge of the dress to create the faux wrap, so I added width along the line of the original pattern (about and inch and a half shown in purple above) and tapered the edge to the side seam.  Keeping in mind that the collar will be folded over when worn, I made sure the "tapering" was a little steep at the edge.  Also, I didn't want Bean to have to wear a shirt underneath this dress, which is why the collar needed to be fuller than it was on the vest: to limit exposure at the neckline.

Another thing to keep in mind when "frankensteining" (thanks to Once Upon a Sewing Machine for the term, hehe) patterns is the individual seam allowances.  In this case both original patterns used 3/8" which is what I normally use as well so there wasn't any additional adjustment to be made.  But it could be an issue if you don't consider it.


Once I had one complete front piece, I used that piece to create the pattern piece which would go under the front and cover the other shoulder to created the faux wrap.  I simply cut the piece across the bodice (shown in pink above) about an inch below where the collar edge meets the side seam.  This creates a double layer across both sides of the bodice front, but as it is meant to be worn on a cold day I welcomed the extra warmth it would provide.  Containing the edge in the side seam was the best way I could think of to keep the wrap from bunching at the front.


For the lining I took the same pattern piece I used for the left front except I cut off 3/8ths of an inch from the top neck seam and cut one full lining piece on the fold.


The back of the dress was made from three pieces.  I took the Anywhere dress pattern and overlay the racerback vest pattern piece so I could mark the shoulder blade cut out areas.  Then I used the cut out shape (adding seam allowances) to create the color blocking pieces which filled out the remaining Anywhere dress pattern.


Adding in the Anywhere dress sleeve (which would fit perfectly since I used the existing Anywhere dress pattern arm holes in both the front and back new pattern pieces) I finally had all the pieces I needed to make the ABC Shawl Collar dress.


The first step to assembling the dress is to make the racerback.  Pin well and then sew the two color blocking shoulder pieces to the back.


In order to not just recite Shwin Designs' pattern (I highly recommend buying it*) I will say to get to this point just follow the pattern instructions Steps 1 through 5.  The only difference will be that one of the front pieces will be short and one will be the full length of the dress.


To attach the lining you will also follow the instructions, but just step 9.  Sew the lining to the main body along the purple dotted line above.  Leave the blue dotted lines at the arm holes open and not sewn together.  You should hand sew the lining along the green dotted line at the back neckline to hold everything in place since there isn't a back lining to attach it to.  You could also sew through the layers along the same line instead of hand sewing, but I preferred the hand sewn invisible seam.


Next attach the sleeves through the main and lining layers just at the arm hole. 


Assembling the dress you need to keep in mind the faux wrap and which side should cross over which in order for everything to be sandwiched correctly.  As I learned while quilting, remember that whatever layer you want to be the middle of the sandwich should be on the top when sewing together.  So start with the back right side facing up.


Then bring the full length dress piece over, pinning the sleeve edge down to the bottom of the skirt.  Also pin the other side from the bottom of the skirt up to where the wrap ends, attaching it to the back piece.


Pull down the other side (the short side) and pin from the sleeve edge down to the waist line where that side ends, catching all the layers.  Then pin the other side which is only a short section, but again catch all the layers.  Sew both seams all the way from sleeve edge to the skirt bottom.


Now that everything has been assembled in the correct order when you turn it right side out it'll look like the picture above.  Fold over the collar so it looks the way you'd like and get ready to attach a button loop and button.  The button is for decoration only, but I think it makes the dress a little more special so I recommend doing the extra step.


For the button loop first create a little house shape from scraps of fabric and sew them together.  Decide where you'd like the button and loop to connect and pin the "house" wrong side up pointing the opposite direction.  Pin through all the layers of the front section of the dress, making sure not to catch the back.  This also helps to secure the layers and prevent additional bunching.


Sew a line across the house to secure it to the front.  Then fold it over, press it in place, add a loop of elastic and sew along the edge of the shape to contain the elastic and raw edge of the house.  Sew the button in place and loop the elastic around it.


The only steps left to complete the dress are to hem the sleeves and bottom of the skirt.  I prefer to add a band to the bottom which is easier than hemming and adds to the sweater dress feel of the dress. 


I love the cozy feel of this dress and am excited for Bean to have two in her fall/winter wardrobe this year.  Plaid is a pain to work with since it takes extra time to line everything up, but it looks so adorable on a little girl, that I'm happy I took the time to make the original dress I had in mind.


Since I'm submitting this in the sew-along for Project Run & Play, I'll link you to all the other sew-along-ers.  I can't wait to see what everyone makes with all the fun plaid fabrics there are this season!


As usual, linking up to:

The Chicken Chick Shaffer Sisters encourage. inspire. uplift. create. Photobucket I Made That Thursday! Get Your Crap Together Happy Hour Projects Photobucket

Thursday, September 19, 2013

Peppermint Bubblegum

This week's Project Run & Play theme of candy had me stumped back when it was first announced.  The only thought I had was something pink with bubble gum as the inspiration.  Maybe Bean's winter jacket this year? 


Then I saw See Kate Sew's fall pattern line (the Nostalgia Collection) and she had a jacket called the Bubblegum Coat which is shown in pink.  It is a really cute style and is based on the jacket she made during the All Star season.  Since there had already been a bubble gum inspired coat on Project Run & Play I thought I'd go a different direction. 

via

I decided I'd still try to use this week to make Bean's winter coat.  Last year her coat was purple so I thought maybe this year I'd do blue.  When I think of blue candy I immediately think of those blue and white spiral peppermint candies. 

While I was searching for pictures of the candies, I stumbled upon this blog which showed how to make the most adorable little peppermint candies made out of fabric.  I swear these would be so perfect as a Christmas garland.  At this point ideas started swirling in my head, but I wasn't sure how they would manifest.

THEN Lexi of Lexi Made submitted her outfits for the first week of Project Run & Play and I fell in love with the little coat she made.  The back of her jacket has a double layer of ruffles and a tiny little bow in the center bottom of the bodice.  Click the link to check out her gorgeous daughters and beautiful photographs as well as the coat. 


Wanting to recreate the look of the back of that jacket without copying it completely, I decided to mix up the peppermint candy theme, the fabric candies, and use the Bubblegum Coat as a base.


The Bubblegum Coat is a fully lined knee-ish length coat.  I like Bean's coats a little shorter since she's still in the toddler age group and I think short coats are adorable with their little legs.  So I first shortened the pattern by about 4 or 5 inches.  I also wanted a slimmer band around the waist so I cut the width of the band in half.  The bodice and sleeves were left as is at the 3T size.


Bean isn't that interested in pockets yet so I decided to leave off the cute pockets from the original coat.  Then at the last minute I thought maybe angled welt pockets would be cute AND if they were positioned correctly they could get her used to how pockets work since they'd be easy to access with her little hands.  I can't believe I have an almost two and a half year old that doesn't understand how cool pockets are, hehe. 


I made a basic welt pocket off the cuff (hehe), but my first welt pocket was made for a pair of Clean Slate Pants (*affiliate link) way back when so I should give credit to Melissa of Blank Slate Patterns (*affiliate link).  The welt edges meet like they should, but in the picture I moved them aside to get a peek at the lining.


Then I started on the back of the skirt portion of the jacket.  I added a lot of width the the back skirt pattern piece and made a second skirt piece the same width, but about half as long to form the double ruffle.  I decided to pleat instead of ruffle for a more polished look.


Since I wanted it to be fully lined and the pleats in the back would make it difficult to get everything to fit nicely with a standard lining, I sewed the lining to the back two skirt pieces before pleating them.  (You can't tell in the pictures, but if you look under the top skirt piece it has the polka dot lining too.)  I did a few pleats across the width and then did the same to the top layer basting everything in place.  Once the skirt was the correct width to fit to the back bodice, I sewed the back skirt pieces to the front skirt pieces and assembled the outer jacket as written.


The jacket lining was made according to the pattern instructions except I just left off the back skirt portion since that had already been sewn to the outer back skirt pieces.  It looked a little funny with no back, but I knew it'd be fine once everything was attached.  Again, I followed the instructions to sew the lining to the outer coat, but instead of leaving a gap at the bottom edge, I just started and stopped at the edges of the back skirt which had already been finished. 


When everything was turned right side out I used the remaining unsewn seam allowance of the lining around the three edges of the back skirt to hand sew the lining down.  In the picture above the green dotted line is where I hand sewed the edges.  I don't mind a little hand sewing since I can do it while watching tv with my husband at night, hehe. 


I made the front buttons out of the same teal-blue stretch bottom-weight, but I used the wrong side since it had a little shine to it.


The fabric peppermint was the perfect final touch for this jacket.  I think it gives this rather formal looking coat a bit of childish flair.  I used the main and lining fabrics and instead of gluing the peppermint together as the tutorial suggested, I sewed the swirl together with the twisted wrapper ends.  I wanted to make sure this little detail would stick around when worn by a toddler.  Or realistically, if she tries to eat it.


The jacket is a little big, but I made it in the 3T size since I want Bean to be able to wear it all winter.  The sleeves have about 4 inches of room to grow tucked in between the lining and outer layer so if her arms grow like a mutant over the next few months, I can unpick the hand stitching and pull out more length.  For now I like the look of the lining showing when I cuff the sleeve ends.


Once again, I've managed to make a wardrobe staple as part of a Project Run & Play sew-along.  It's tough getting things sewn in time to participate - made even more difficult since Bean hasn't napped once this entire week - but I'm always so happy when I do.  It's fun to see how everyone else interprets each theme. 

As usual, linking up to:

The Chicken Chick Shaffer Sisters encourage. inspire. uplift. create. Photobucket I Made That Thursday! Get Your Crap Together Happy Hour Projects Photobucket